Steps:

1. Plug the J-ReX into the vehicle’s OBD-II port.
2. Find the connector number on the back of the J-ReX (e.g., XXXXX).
3. On your device, search for available WiFi networks.
   Note: If you are using a phone, disable mobile data first to avoid interference.
4. Look for a network named Connector[XXXXX].
   • If you don’t see it, go to the Resetting J-ReX section below.
5. Connect to the J-ReX network. You may get a notification saying you’re connected without internet—this can be ignored or dismissed.
6. Open a web browser on the same device and go to: connector.help
7. Under Available networks, select the WiFi network you want to connect the J-ReX to.
8. Enter the WiFi password and press Connect.
9. You will see a loading circle.
10. Check the green and orange LED lights near the Ethernet port on the J-ReX. Wait until both lights stay on continuously—this may take a moment.
11. When both lights are steadily lit, the J-ReX is successfully connected to the WiFi network.