The easiest way to connect the Remote quickly and efficiently is by using our OBD WiFi Connect app. With this app, you can easily connect the Remote to a WiFi network or mobile hotspot. The app is available for both Android and Apple devices.
1. Download and install the app
- Go to the Google Play Store or the App Store
- Search for: OBD WiFi Connect
- Download and install the app on your device
2. Connect the Remote
- Connect the Remote to the vehicle’s OBD port
- Make sure the ignition is switched on
3. Connect via the app
- Open the OBD WiFi Connect app
- Follow the instructions shown in the app
- Select a WiFi network or mobile hotspot
- Enter the password and confirm the connection
⚠️ Important
- Carefully check the password for typing errors
- No error message will be shown if the password is incorrect
- If the password is entered incorrectly, the Remote will not be able to connect
4. Check the connection
- Once both LEDs next to the ethernet port remain continuously lit, the Remote is successfully connected
Important
It is possible that the front LEDs on top of the Remote turn blue and the device starts beeping. This indicates that an update is being downloaded. The Remote automatically downloads updates whenever they become available and the device is connected to a network.
During an update, it is important to keep the Remote connected to the vehicle and not interrupt the connection. Wait until the front LEDs turn green again. Once they are green, the update is complete and the Remote is ready for use again.